 |
上海维特锐实业发展有限公司
主营产品： 威仕流量计,VSE流量计,贺德克传感器,阿托斯比例阀 |
11
联系电话
|
上海维特锐实业发展有限公司
主营产品： 威仕流量计,VSE流量计,贺德克传感器,阿托斯比例阀 |
联系电话
2016-12-16 阅读(288)
| 提 供 商 | 上海维特锐实业发展有限公司 | 资料大小 | 222.5KB |
|---|---|---|---|
| 资料图片 | 【点击查看】 | 下载次数 | 32次 |
| 资料类型 | PDF 文件 | 浏览次数 | 288次 |
倍加福P+F编码器RSI58O-02YAAR61T-01024技术资料
| General specifications | ||
|---|---|---|
| Detection type | photoelectric sampling | |
| Pulse count | 1024 | |
| Functional safety related parameters | ||
| MTTFd | 140 a | |
| Mission Time (TM) | 20 a | |
| L10h | 2 E+9 | |
| Diagnostic Coverage (DC) | 0 % | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| No-load supply current | max. 60 mA | |
| Output | ||
| Output type | push-pull, incremental | |
| Voltage drop | < 4.4 V | |
| Load current | max. per channel 40 mA , short-circuit prtected (not with Ub), reverse polarity protected | |
| Output frequency | max. 200 kHz | |
| Rise time | 400 ns | |
| Connection | ||
| Connector | type 9416 (M23), 12-pin | |
| Standard conformity | ||
| Degree of protection | DIN EN 60529, IP65, IP66, IP68 | |
| Climatic testing | ||
| Static climatic testing | DIN EN 60068-2-78 , no moisture condensation | |
| Cyclic climatic testing | DIN EN 60068-2-30 55 °C, 6 cycles | |
| Salt spray test | DIN EN 60068-2-52 , 672 h | |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Shock resistance | DIN EN 60068-2-27, 100 g, 3 ms | |
| Vibration resistance | DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose, Class 2 Power Source | |
| Ambient conditions | ||
| Operating temperature | -40 ... 60 °C (-40 ... 140 °F) | |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Mechanical specifications | ||
| Material | ||
| Housing | aluminum, coated, salt water resistant | |
| Flange | aluminum, coated, salt water resistant | |
| Shaft | stainless steel 1.4404 / AISI 316L | |
| Mass | approx. 280 g | |
| Rotational speed | max. 100 min -1 | |
| Moment of inertia | ≤ 35 gcm2 | |
| Starting torque | ≤ 4.5 Ncm | |
| Shaft load | ||
| Angle offset | 1 ° | |
| Axial offset | max. 1 mm | |
具体相关参数可以下载附件查看，有倍加福的相关询价可以找上海维特锐龙工
